Browse all practice questions for the NCLE Basic Certification Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

NCLE Basic Certification Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What is the condition characterized by the obstruction of the flow of aqueous humor out of the anterior chamber?
  • Which layer is NOT part of the cornea?
  • What is typically a sign of a poorly finished transitional zone in contact lenses?
  • What is the purpose of a red chrome contact lens?
  • What is the effect of 3% hydrogen peroxide when it comes into contact with the eye?
  • Which two methods are used for stabilization of rigid gas permeable (RGP) lenses?
  • What happens to the stroma if the endothelium fails to perform its pumping function?
  • Which system is considered most effective for removing deposits from contact lenses?
  • If a soft contact lens gets stuck to the cornea, what should you do?
  • Which symptom indicates a flat fit for RGP lenses?
  • How long should a wearer rub the lens when using a multipurpose solution?
  • At a 36 diopter curve, what is the approximate chord measurement of the cornea that the keratometer reads?
  • What type of illumination is primarily used for viewing the edge light of soft contact lenses?
  • What condition can prolonged use of digital devices cause due to decreased blinking?
  • What does superior punctate staining indicate?
  • How might an emerging presbyope who is hyperopic benefit from contact lenses?
  • In contact lens fittings, too tight an edge may cause what issue?
  • What are soft lenses most likely to be coated with?
  • What does lid sensation indicate when wearing contact lenses?
  • What is one benefit of using a thicker lens for managing mild corneal astigmatism?
  • What is the normal vascular state of the cornea?
  • What is the primary action needed if a patient experiences negative symptoms after using hydrogen peroxide solution?
  • Which type of lenses are gas permeable lenses?
  • A patient with symptoms of poor tear exchange needs to adjust what aspect of their lens?
  • What is the primary purpose of polishing contact lenses in-house?
  • Which type of light is the best for illuminating a dynamic fluorescein pattern?
  • In which location are the openings of the meibomian glands found?
  • What percentage of patients are non-compliant to at least one of their contact lens care regimes?
  • What is the primary difference between aspheric and concentric lens designs?
  • What does the expiration date of a contact lens indicate?
  • If a soft contact lens exhibits sluggish movement, what should be done?
  • What might a contact lens patient experience if they do not soak their lenses in a hydrogen peroxide cleaning system for the required duration?
  • What does stippling across the corneal surface typically indicate?
  • Which of the following indicates a tight lens fit?
  • What is a consequence of not neutralizing hydrogen peroxide solutions for at least 6 hours?
  • What condition is likely to result in a high riding lens?
  • What is the main function of a weekly enzyme cleaner for contact lenses?
  • A patient with aniridia and photophobia is likely to require which type of lenses?
  • How does adding a +1.25 D lens affect the keratometer reading?
  • A gas permeable lens that fits on a flatter K results in what type of lacrimal lens?
  • The keratometer measures which portion of the cornea?
  • What component is essential for the cornea to remain clear and is responsible for fluid regulation?
  • What type of lens adheres to the globe more effectively than other soft lens materials?
  • How do rigid gas permeable lenses work?
  • What ingredient is least likely to have a negative impact on the cornea?
  • What type of illumination is mainly used to detect corneal edema?
  • What is the purpose of the shadowgraph in lens production?
  • What is referred to as the sagittal depth of a lens?
  • What is the primary reason for corneal edema under a prism ballast?
  • What technique is employed to correct high riding gas permeable minus lenses?
  • What is a side effect of taking decongestants that can affect contact wearers?
  • Which design is characterized as having both front and back toric surfaces?
  • What color change does Thimerosal cause in contact lenses?
  • When a gas permeable lens fits steeper than K, which statement is accurate regarding the lens power?
  • What characteristic does a profiled gas permeable lens have that differentiates it from standard lenses?
  • To evaluate the transitional zone between the optic zone and the lens edge, which tool is most appropriate?
  • What is the result of increasing total diameter on a contact lens?
  • What is essential when using a hydrogen peroxide cleaning system?
  • What is the purpose of a prism ballast in contact lenses?
  • What impact does a dehydrated contact lens have on inferior arcuate lesion staining?
  • Which layer of the cornea accounts for 90% of its thickness?
  • Which corneal layer facilitates transparency through its pump action?
  • What four groups of pathogens must contact lens disinfection solutions be effective against according to the FDA?
  • How can the performance of an A-8.50 gas permeable lens be improved for better lid attachment?
  • What is the best method to correct for a low riding gas permeable minus lens?
  • What should be done first if a rigid gas permeable wearer complains of poor visual acuity?
  • Why does the Front Toric lens require prism ballast?
  • Which preservative is noted for being the least likely to cause discoloration in contact lenses?
  • What characteristic of silicone lenses contributes to the formation of mucin balls?
  • What is a key drawback of silicone lenses related to their surface characteristics?
  • What is the purpose of a wetting solution in contact lenses?
  • How does a silicone lens typically behave when in contact with water?
  • What is the result of a larger optical zone in a tight fitting lens?
  • What is the purpose of an optic section in examining the cornea?
  • What type of astigmatism is the Front Toric lens specifically used to address?
  • Which of the following is true about with-the-rule astigmatism?
  • If all mires are out of focus on a radioscope verification, what is likely true about the lens?
  • Which type of contact lens design may rotate without causing visual impairment?
  • When assessing a RGP fit, what does fluorescein indicate if there is central pooling?
  • Why are contact lens wearers living in dry spaces more likely to experience discomfort?
  • What condition indicates that a Bitoric lens might be necessary?
  • What is the primary purpose of an enzyme in the context of contact lens care?
  • When fitting a gas permeable lens steeper than the K reading, what type of power does the lacrimal lens have?
  • Why is it important to consider the base curve when fitting contact lenses?
  • What tool is used to measure the diameter of a rigid lens?
  • If a rigid gas permeable lens is too tight, what should be decreased?
  • What is a myoflange designed to prevent in contact lens fitting?
  • What type of illumination focuses a beam of light and microscope directly on the image being examined?
  • What is often recommended if a contact lens becomes stuck in the eye?
  • Which type of deposits are effectively managed by enzymes on contact lenses?
  • What is the primary function of mucin in the tear film?
  • Which staining on the cornea suggests toxicity from contact lens solutions?
  • How does the cornea's curvature change as it moves away from the apex?
  • What typically causes punctate stains on the corneal epithelium?
  • What does a high magnification during an optic section allow an examiner to see?
  • Lenticular or residual astigmatism can be corrected by which type of contact lens?
  • Which part of the cornea does the keratometer primarily measure?
  • What is likely to cause blurry near vision when wearing RGP lenses?
  • Which preservative is known to be mercury-based?
  • What does central pooling in RGPs indicate?
  • What typically causes punctate stains on the corneal epithelium?
  • Which of the following parameters indicates a higher astigmatism on the Bitoric lens?
  • What should a fitter do to decrease overall lens diameter to make a contact lens looser?
  • Why should fluorescein not be used on soft contact lenses?
  • What is the approximate curvature of the limbus in relation to the cornea?
  • Which corneal layer is known for being extremely thin and innermost?
  • What is the primary visual distinction in alternating visions?
  • What is the typical set-up for measuring the steepest K in WTR astigmatism?
  • What illumination technique utilizes a 2-4mm slit of light aimed at the limbus to observe corneal characteristics?
  • What is the purpose of Sclerotic Scatter in clinical assessment?
  • What is indicated when the corneal stroma becomes hazy?
  • When documenting extended keratometer readings, what should be added or subtracted based based on new readings?
  • What is the term for removing plastic from the bottom of a lens to create a flat edge that will control rotation?
  • Why might a lens ride high on a person's eye?
  • If you want to increase tear exchange in a lens fitting, what must be done?
  • What purpose does a minus lenticular design serve?
  • What is the strength of the cornea as a refracting surface?
  • What does the slot gauge specifically measure?
  • What is the primary function of soaking solutions for contact lenses?
  • What role does chlorobutanol play in contact lens solutions?
  • What does it mean if an RGP lens has no apical clearance?
  • What is a common cause of discoloration in contact lenses that appear pink?
  • When a myope switches from eyeglasses to contact lenses, what is the visual effect observed?
  • What is the first layer of the cornea?
  • When a soft contact lens demonstrates excessive movement, what should be considered?
  • What does lens equilibration refer to?
  • In terms of keratometry, what does a loose fitting lens indicate about the appearance of the mires?
  • What is the typical measurement format for describing a toric lens?
  • What is a potential indication that a foreign body is trapped in a contact lens wearer’s eye?
  • When keratometer mires are only clear when the wearer blinks, what does this indicate about the lens fit?
  • An example of a steep fit in contact lenses may include which of the following symptoms?
  • Which type of illumination is primarily used for examining the globe and extraocular structures?
  • What must be included with a hydrogen peroxide cleaning system to ensure it works correctly?
  • If a soft contact lens wearer states their vision is clear only after blinking, what does this indicate?
  • What does the term 'dimple veiling' refer to in contact lenses?
  • What is a notable disadvantage of hydrophilic contact lenses?
  • Why might a silicone contact lens cause a gritty sensation for the wearer?
  • What could excessive movement of a soft contact lens suggest?
  • What symptom is most likely caused by a damaged contact lens?
  • What does a parallelpiped illumination with a 1-2 mm slit of light primarily help to observe?
  • What is a common abnormal response reported by contact lens wearers?
  • What can cause epithelial damage regarding hydrogen peroxide cleaning solutions?
  • What characteristic of a +14 myoflange contact lens makes it suitable for a high plus prescription?
  • Which tests use dyes to visualize damaged cells on the cornea?
  • What observable effect indicates that a keratometer is out of focus on the cornea?
  • What observation might indicate a contact lens is improperly fitted during wear?
  • Which glands are responsible for secreting the lipid layer of the tear film?
  • What happens when a lens fits flatter than K in terms of its lacrimal lens?
  • Which test is used to determine the quantity of tears produced?
  • What should never be used to irrigate the eye when a soft contact lens gets stuck?
  • During the manufacture of a contact lens using a lathe, what should be avoided to prevent distortion?
  • What is a potential effect of long-term RGP (Rigid Gas Permeable) lens wear?
  • In contact lens terminology, what does the term 'hydrophilic' relate to?
  • What characteristic of a material with a lower DK value indicates its rigidity?
  • What is the appropriate action to take when there is insufficient tear exchange with a contact lens?
  • When are soft lenses considered to be poorly fitted?
  • Which device is used to measure the back vertex power of a lens?
  • What is a common characteristic of soft toric contact lenses?
  • What is a key characteristic of gas permeable contact lenses?
  • What action can increase tear exchange in RGP lenses?
  • Which statement best describes the characteristics of corneal curvature?
  • What does the staining pattern known as Acruate indicate?
  • Which type of contact lens is specifically designed for keratoconus?
  • How often should surfactant cleaner be used after contact lens removal?
  • What does the BUT (break up time) test assess?
  • What is the primary use of a shadowgraph in contact lens evaluation?
  • What effect does Sorbic Acid have on contact lenses?
  • Which action would tighten the fit of a contact lens?
  • What is a typical "K" reading for with-the-rule astigmatism?
  • What effect does steepening the posterior curve of a contact lens have?
  • What is required for a preservative to be effective in contact lens solutions?
  • What is a common Rx example for against-the-rule astigmatism?
  • What does the visual effect of less magnification and more minification in contact lenses indicate for hyperopes?
  • If a soft contact lens shows edge lift, what adjustment should be made?
  • What is the role of a buffering agent in contact lenses?
  • What action should be taken if excessive dryness is observed in a soft contact lens wearer?
  • Which lens type is noted for distinct areas for both distance and reading?
  • What range of diopters can the BL keratometer measure?
  • Where is the peripheral optical zone located in relation to the contact lens?
  • A contact lens that is too tight is likely to cause what issue?
  • How often should a contact lens case be changed to ensure safety and hygiene?
  • What is the effective method for removing protein from a gas permeable lens?
  • What method can be used to loosen the fit on a rigid gas permeable (RGP) lens?
  • What effect does excessive thickness have on contact lenses?
  • What is the normal tear break-up time (TBUT)?
  • Vertically oriented, delicate lines located near the level of the stroma are called what?
  • What is the most effective way to evaluate the movements of hydrogel lenses?
  • What common preservative found in gas permeable solutions may cause eye irritation?
  • What characterizes against-the-rule astigmatism?
  • What does SICS stand for in regards to contact lens wear?
  • Which factor is indicative of contact lens hypoxia during retro illumination?
  • What is a common sign of excessive dryness in a soft contact lens wearer?
  • What is a common issue if the curve of the reflected light on a lens surface is not smooth and flowing?
  • What type of contact lens wearing schedule should be provided?
  • What is the recommended method for cleaning residue from gas permeable lenses?
  • What can eliminate RGP lens flexure?
  • Which cleaning method is most likely to shorten the lifespan of contact lenses?
  • A patient with keratitis sicca is more likely to develop what condition?
  • When should the follow-up for a first-time extended wear contact lens user occur?
  • What is an alternative use for the keratometer in optometry?
  • When inspecting for a warped lens, what tool is used to identify the base curves?
  • What adjustment should be made if an RGP lens is too flat?
  • When is it appropriate to assess the suitability of lens design for astigmatism?
  • A gas permeable contact lens is typically designed with a thin overall profile to achieve what effect on the cornea?
  • What condition may papillary conjunctiva indicate in a contact lens wearer?
  • If a gas permeable lens fits on the 'K' value, what is the lacrimal lens power?
  • What curve of the contact lens is designed to fit over the apical zone of the cornea?
  • What is the base curve of the Back Toric lens?
  • What type of modification involves removing the bottom surface of a lens?
  • What type of corneal astigmatism is best corrected by a back toric design lens?
  • What is indicated by excessive lag in an RGP lens fitting?
  • Which symptoms indicate a tight fitting lens?
  • How many diopters of power may be added for lenses left in the office using a soft cloth or sponge?
  • Which in-office modification is considered the easiest to perform on a lens?
  • What happens to the tear pH when the buffering agent alters an ingredient?
  • What indicates the amount of corneal astigmatism when using a keratometer?
  • Which type of illumination uses reflected light to observe a portion of the eye?
  • What is a possible outcome of using high concentrations of sorbic acid in soft contact lenses?
  • What is specular reflection primarily used to examine?
  • How long can extended wear contact lenses typically be worn continuously?
  • What can decreased blinking during prolonged digital device use lead to?
  • What can result from using hydrogen peroxide as a rinsing agent?
  • How often should extended wear contact lens users remove their lenses for disinfection?
  • How is the base curve defined in terms of the Back Toric lens?
  • What effect does a steep fit have on the power of the lacrimal lens?
  • A lot of apical vaulting in an RGP lens indicates what kind of fit?
  • What does CLARE stand for in the context of contact lenses?
  • How many diopters does a prism ballast typically use to prevent excessive lens rotation?
  • What is the typical diopter difference of the secondary curve of a RGP compared to the Central Power Curve (CPC)?
  • Which instrument is used specifically to measure the posterior optical zone diameter?
  • How much prism is required for proper orientation in a prism ballasted gas permeable lens?
  • Which tool can verify the lens diameter, optic zone, and peripheral curve width simultaneously?
  • What phenomenon can inadvertently be added to a lens if it is tilted during the surfacing process?
  • Which device uses concentric circles to assess the corneal surface quality?
  • Which layer of the cornea is primarily responsible for maintaining deturgescence?
  • What is the primary source of oxygen that the cornea receives?
  • What change should be made to increase lens movement on a contact lens?
  • What forms the first line of defense in the protective system of the eye?
  • What are the two primary functions of a radioscope?
  • Which contact lens parameter is associated with lens bends and the "ski effect"?
  • In a case of high astigmatism fitted with a spherical RGP, where will the lens typically show touch?
  • What is the main source of oxygen for the corneal epithelium?
  • What does a flat fit in an RGP lens imply?
  • To increase tear exchange on a RGP lens, which action is recommended?
  • When using a radioscope, which region must the CL fitter move through before seeing the spoke pattern?
  • What condition occurs when water is forced into the layers of the eye?
  • What does the vertex distance formula indicate about power change?
  • What does a scratch-like staining pattern on the cornea indicate?
  • What does a keratometer reading exceeding 0.50D indicate?
  • Which parameter is NOT associated with the Back Toric lens?
  • What is measured with the Front Toric lens?
  • Which of the following methods is NOT used for stabilizing soft toric contact lenses?
  • What can cause an RGP lens to displace?
  • What causes inferior arcuate lesion staining in the eyes?
  • What is a sign of excessive movement in a rigid gas permeable (RGP) lens?
  • How is the relationship between lens diameter and base curve expressed in terms of change?
  • What does an observation of vertical corneal striae in the posterior central cornea suggest?
  • If a soft contact lens wearer experiences burning as the day progresses, what does this usually indicate?
  • Which area of the cornea contains the highest curvature?
  • Which group of individuals is more likely to experience corneal desensitivity?
  • If an RGP is fitted too tightly, which adjustment is recommended?
  • In the context of contact lenses, what does SL stand for when discussing illumination techniques?
  • What might be a consequence of a lens that is too steep?
  • What is the primary indication of a steep fitting contact lens?
  • What term is used to describe the smooth junctures between curves on the posterior surface of a lens?
  • What type of agent should patients use to clean their contact lenses upon removal?
  • What are the FDA Groupings of contact lenses based on water content and ionic properties?
  • Mucin balls are primarily associated with which type of lenses?
  • How long does it typically take to adapt to wearing soft contact lenses?
  • How does prism ballast work in contact lenses?
  • Which of the following characteristics makes chlorobutanol a preferred preservative?
  • What is a characteristic of bifocal lens designs?
  • In a Back Toric lens, what should the corneal astigmatism be compared to the refractive astigmatism?
  • What is the primary purpose of a surfactant cleaner?
  • What needs to be determined using the Edge Flare method?
  • What is the primary function of oxygen in the context of contact lens wear?
  • What can cause spectacle blur in lens wearers?
  • What is the average horizontal visible iris diameter (HVID)?
  • What is the duration of the Schirmer's test for measuring tear production?
  • In K-readings, what does the smallest number represent?
  • Bowman's layer is known for which characteristic?
  • What type of contact lenses typically require a weekly enzyme cleaning regimen?
  • For how long should contacts be soaked if no specific time is provided by the manufacturer?
  • In which meridian will a spherical RGP lens touch if fitted to a patient with high oblique astigmatism?
  • What should a clinician look for in the first follow-up exam after fitting extended wear lenses?
  • What type of astigmatism can RGPs correct for?
  • Which type of staining is an indication of excessive dryness in contact lens wearers?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy